培训损失正在减少，但验证损失并未减少

Question

我正在尝试对皮肤损伤进行语义分割。我用SegNet作为我的模型。但运行该模型后，训练损失有所减少，但验证损失并未减少。i、 e.出现过盈问题。我多次调整学习速度，减少了数字密集层的数量，但没有解决方案。我也曾辍学，但仍有过度装修的情况发生。 Here is the graph

以下是我的模型的代码： def segnet（输入大小=（512、512、1））：

# Encoding layer
img_input = Input(input_size)
x = Conv2D(64, (3, 3), padding='same', name='conv1',strides= (1,1))(img_input)
x = BatchNormalization(name='bn1')(x)
x = Activation('relu')(x)
x = Conv2D(64, (3, 3), padding='same', name='conv2')(x)
x = BatchNormalization(name='bn2')(x)
x = Activation('relu')(x)
x = MaxPooling2D()(x)
x = Dropout(0.7)(x)

x = Conv2D(128, (3, 3), padding='same', name='conv3')(x)
x = BatchNormalization(name='bn3')(x)
x = Activation('relu')(x)
x = Conv2D(128, (3, 3), padding='same', name='conv4')(x)
x = BatchNormalization(name='bn4')(x)
x = Activation('relu')(x)
x = MaxPooling2D()(x)
x = Dropout(0.7)(x)


x = Conv2D(256, (3, 3), padding='same', name='conv5')(x)
x = BatchNormalization(name='bn5')(x)
x = Activation('relu')(x)
x = Conv2D(256, (3, 3), padding='same', name='conv6')(x)
x = BatchNormalization(name='bn6')(x)
x = Activation('relu')(x)
x = Conv2D(256, (3, 3), padding='same', name='conv7')(x)
x = BatchNormalization(name='bn7')(x)
x = Activation('relu')(x)
x = MaxPooling2D()(x)
x = Dropout(0.7)(x)

x = Conv2D(512, (3, 3), padding='same', name='conv8')(x)
x = BatchNormalization(name='bn8')(x)
x = Activation('relu')(x)
x = Conv2D(512, (3, 3), padding='same', name='conv9')(x)
x = BatchNormalization(name='bn9')(x)
x = Activation('relu')(x)
x = Conv2D(512, (3, 3), padding='same', name='conv10')(x)
x = BatchNormalization(name='bn10')(x)
x = Activation('relu')(x)
x = MaxPooling2D()(x)
x = Dropout(0.7)(x)

x = Conv2D(512, (3, 3), padding='same', name='conv11')(x)
x = BatchNormalization(name='bn11')(x)
x = Activation('relu')(x)
x = Conv2D(512, (3, 3), padding='same', name='conv12')(x)
x = BatchNormalization(name='bn12')(x)
x = Activation('relu')(x)
x = Conv2D(512, (3, 3), padding='same', name='conv13')(x)
x = BatchNormalization(name='bn13')(x)
x = Activation('relu')(x)
x = MaxPooling2D()(x)
x = Dropout(0.7)(x)

x = Dense(256, activation = 'relu', name='fc1')(x)
x = Dense(256, activation = 'relu', name='fc2')(x)
# Decoding Layer 
x = UpSampling2D()(x)
x = Conv2DTranspose(512, (3, 3), padding='same', name='deconv1')(x)
x = BatchNormalization(name='bn14')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(512, (3, 3), padding='same', name='deconv2')(x)
x = BatchNormalization(name='bn15')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(512, (3, 3), padding='same', name='deconv3')(x)
x = BatchNormalization(name='bn16')(x)
x = Activation('relu')(x)
x = Dropout(0.7)(x)

x = UpSampling2D()(x)
x = Conv2DTranspose(512, (3, 3), padding='same', name='deconv4')(x)
x = BatchNormalization(name='bn17')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(512, (3, 3), padding='same', name='deconv5')(x)
x = BatchNormalization(name='bn18')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(256, (3, 3), padding='same', name='deconv6')(x)
x = BatchNormalization(name='bn19')(x)
x = Activation('relu')(x)
x = Dropout(0.7)(x)

x = UpSampling2D()(x)
x = Conv2DTranspose(256, (3, 3), padding='same', name='deconv7')(x)
x = BatchNormalization(name='bn20')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(256, (3, 3), padding='same', name='deconv8')(x)
x = BatchNormalization(name='bn21')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(128, (3, 3), padding='same', name='deconv9')(x)
x = BatchNormalization(name='bn22')(x)
x = Activation('relu')(x)
x = Dropout(0.7)(x)

x = UpSampling2D()(x)
x = Conv2DTranspose(128, (3, 3), padding='same', name='deconv10')(x)
x = BatchNormalization(name='bn23')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(64, (3, 3), padding='same', name='deconv11')(x)
x = BatchNormalization(name='bn24')(x)
x = Activation('relu')(x)
x = Dropout(0.7)(x)

x = UpSampling2D()(x)
x = Conv2DTranspose(64, (3, 3), padding='same', name='deconv12')(x)
x = BatchNormalization(name='bn25')(x)
x = Activation('relu')(x)
x = Conv2DTranspose(1, (3, 3), padding='same', name='deconv13')(x)
x = BatchNormalization(name='bn26')(x)
x = Activation('sigmoid')(x)
pred = Reshape((input_size[0], input_size[1]))(x)

return Model(inputs=img_input, outputs=pred)

我在另一个模型UNet中使用了相同的数据集，但是对于UNet没有过度拟合。这只会使SegNet模型过度拟合。 有关更多信息： 模型=segnet（输入_大小=（224224，输入_通道））

model.compile(optimizer= Adam(lr=1e-5), loss= [dice_coef_loss]
          , metrics=[iou, dice_coe, precision, recall, accuracy])

model_checkpoint = ModelCheckpoint(str(j+1) + '_skin_leison.hdf5', 
                                   monitor='loss', 
                                   verbose=1, 
                                   save_best_only=True)

callbacks_list = [model_checkpoint]
history = model.fit(X_train_cv,
                 y_train_cv,
                 epochs= 70,
                 callbacks = callbacks_list,
                 batch_size= 8,
                 validation_data=(X_valid_cv, y_valid_cv))