tkinter在执行command+progressbar时没有响应。（多线程）

Question

在我的项目中，我实现了一个与可穿戴传感器接口的图形界面。 我编写了一个代码（multi.py），直接与3个传感器接口。然后我为图形界面（GUI.py）编写了一些代码，当我单击按钮时，它会调用multi.py的不同部分

当我从相应的按钮中调用“configure_clicked（）”和“download_clicked（）”时，GUI会冻结（继续工作），因为调用函数（multi.configure&；multi.download）需要一些时间才能完成（连接到设备并从设备下载数据）。我知道我必须再做一个“线程”——>；多线程。请问，谁能帮我创建一个多线程

我还有一个“进度条”，它应该在每个函数的开始处启动，但“configure_clicked（）”和“download_clicked（）”不会出现这种情况，而我设法将它滑动到“start_clicked”和“stop_clicked”之间

我正在附上密码。 提前感谢任何帮助我的人

from tkinter import * 
from tkinter import messagebox, ttk
import multi_sensor_acc_gyro1 as multi 

class GUI:

    def __init__(self,master):
        self.master=master
        self.states=[]

        ...
        ...
        #configure button
        self.btn_configure=Button(self.quadro_pulsanti_sx,relief=RAISED,command=self.configure_clicked)
        #start button
        self.btn_start=Button(self.quadro_pulsanti_dx,command=self.start_clicked,relief=RAISED)
        #stop button 
        self.btn_stop=Button(self.quadro_pulsanti_dx,command=self.stop_clicked,relief=RAISED)
        #download button
        self.btn_download=Button(self.quadro_pulsanti_dx,command=self.download_clicked,relief=RAISED)
        #save button 
        self.btn_save=Button(self.quadro_pulsanti_dx,relief=RAISED,command=self.save_clicked)
        #reset button 
        self.btn_reset=Button(self.quadro_pulsanti_sx,relief=RAISED,command=self.reset_clicked)
        #progress bar 
        self.pb=ttk.Progressbar(self.quadro_pulsanti_basso,orient=HORIZONTAL,length=350,mode="indeterminate")
        self.label_pb=Label(self.quadro_pulsanti_basso,text="")

    def configure_clicked(self):
        mac_address=["F7:64:55:AD:0A:19","F2:A1:3A:E2:F2:ED","F9:8E:32:DD:1A:EB"]
        
        output_1=multi.configure(mac_address) 
        self.states=output_1[0]
        self.loggers_acc=output_1[1]
        self.loggers_gyro=output_1[2]

        self.label_pb.configure(text="")
        messagebox.showinfo("CONFIGURE clicked","the sensors have been configured\n\nclick OK to continue")

    def start_clicked(self):

        multi.start(self.states)
        
        self.pb.start()
        self.label_pb.configure(text="registration in progress...")

    def stop_clicked(self):

        self.pb.stop()
        self.label_pb.configure(text="")

        multi.stop(self.states)
    
    def download_clicked(self):

        #self.pb.start()
        #self.label_pb.configure(text="Download in progress...")

        output_2=multi.download(self.states,self.loggers_acc,self.loggers_gyro) 
        self.df_tr_tot=output_2[0]
        self.df_gd_tot=output_2[1]
        self.df_gs_tot=output_2[2]

        #self.label_pb.configure(text="")
        #self.pb.stop()

        messagebox.showinfo("DOWNLOAD clicked","the data has been downloaded\n\nclick OK to continue")

         
    def save_clicked(self):
        
        #self.txt_pz.focus_set()
        #self.txt_pz.get()
        
        self.txt_pz.focus_set()
        id_pz=self.txt_pz.get()
        
        multi.save(self.df_tr_tot,self.df_gd_tot,self.df_gs_tot,id_pz)

        messagebox.showinfo("SAVE clicked","I dati sono stati salvati\n\ncliccare OK per continuare")

window = Tk()
window.title("   Grafic User Interface for MMR")
window.iconbitmap('C:/Users/salvo/Documents/MetaWear-SDK-Python/examples/favicon.ico')
    
height=560
width=540 
left=(window.winfo_screenwidth()-width)/2 
top=(window.winfo_screenheight()-height)/2 
geometry="%dx%d+%d+%d" % (width,height,left,top) 
window.geometry(geometry)

gui=GUI(window)

window.mainloop()

Answer 1

发生的情况是，您的计算和Tkinter都存在于同一个线程中，因此为了执行计算，Tkinter的mainloop()的执行必须暂停，直到这些进程完成。最简单的解决方案是添加一些helper方法，并在按下按钮时在单独的线程中调用它们：

from threading import Thread

 def configure_clicked(self):
     t = Thread(target=self._configure_clicked)
     t.start()

 def _configure_clicked(self):

     mac_address=["F7:64:55:AD:0A:19","F2:A1:3A:E2:F2:ED","F9:8E:32:DD:1A:EB"]
        
     output_1=multi.configure(mac_address) 
     self.states=output_1[0]
     self.loggers_acc=output_1[1]
     self.loggers_gyro=output_1[2]

     self.label_pb.configure(text="")
     messagebox.showinfo("CONFIGURE clicked","the sensors have been configured\n\nclick OK to continue")

你也可以用其他方法做类似的事情。之后一切都会好起来的

Answer 2

这是确保tkinter在运行长任务时不会停止响应的方法：

import threading
from time import sleep

def operation():
    # Create a new thread
    new_thread = threading.Thread(target=_operation, daemon=True)
    # Start the thread
    new_thread.start()
    # continue code or run this:
    while new_thread.is_alive(): # While the new thread is still running
        # Here you can also add a loading screen
        # Make sure tkinter doesn't say that it isn't responding
        tkinter_widget.update() # `tkinter_widget` can be any tkinter widget/window
        sleep(0.1) # A bit of delay so that it doesn't use 300% of your CPU

def _operation()
    # Here you can do the operation that will take a long time
    pass

当需要运行操作时，调用operation，它将启动新线程。注意：确保新线程中没有任何tkinter内容，因为tkinter会崩溃