Python中文网 - 问答频道, 解决您学习工作中的Python难题和Bug
Python常见问题
我正在编写一个热测试代码，该代码需要每10秒从以下命令获取一次信息racadm getsensorinfo
我想将信息作为字典保存，以便每10秒将相关信息写入csv文件。 我试过几种方法，但都达不到相应的效果
这是我试图制作字典的输出：
Sensor Type : POWER
<Sensor Name> <Status> <Type>
PS1 Status Present AC
PS2 Status Present AC
Sensor Type : TEMPERATURE
<Sensor Name> <Status> <Reading> <lc> <uc> <lnc>[R/W] <unc>[R/W]
[Key = iDRAC.Embedded.1#CPU1Temp]
CPU1 Temp Ok 35C 3C 88C NA [N] NA [N]
[Key = iDRAC.Embedded.1#CPU2Temp]
CPU2 Temp Ok 39C 3C 88C NA [N] NA [N]
[Key = iDRAC.Embedded.1#SystemBoardInletTemp]
System Board Inlet Temp Ok 18C -7C 47C 3C [Y] 43C [Y]
[Key = iDRAC.Embedded.1#SystemBoardExhaustTemp]
System Board Exhaust Temp Ok 29C 3C 80C 8C [N] 75C [N]
Sensor Type : FAN
<Sensor Name> <Status> <Reading> <lc> <uc> <PWM %> <Type>
System Board Fan1A Ok 5640RPM 600RPM NA 25% Standard Performance
System Board Fan1B Ok 5160RPM 600RPM NA 25% Standard Performance
System Board Fan2A Ok 5520RPM 600RPM NA 25% Standard Performance
System Board Fan2B Ok 5280RPM 600RPM NA 25% Standard Performance
System Board Fan3A Ok 5520RPM 600RPM NA 25% Standard Performance
System Board Fan3B Ok 5280RPM 600RPM NA 25% Standard Performance
System Board Fan4A Ok 5520RPM 600RPM NA 25% Standard Performance
System Board Fan4B Ok 5160RPM 600RPM NA 25% Standard Performance
System Board Fan5A Ok 5520RPM 600RPM NA 25% Standard Performance
System Board Fan5B Ok 5160RPM 600RPM NA 25% Standard Performance
System Board Fan6A Ok 5520RPM 600RPM NA 25% Standard Performance
System Board Fan6B Ok 5280RPM 600RPM NA 25% Standard Performance
System Board Fan7A Ok 5640RPM 600RPM NA 25% Standard Performance
System Board Fan7B Ok 5160RPM 600RPM NA 25% Standard Performance
System Board Fan8A Ok 5520RPM 600RPM NA 25% Standard Performance
System Board Fan8B Ok 5280RPM 600RPM NA 25% Standard Performance
Sensor Type : VOLTAGE
<Sensor Name> <Status> <Reading> <lc> <uc>
System Board DIMM PG Ok Good NA NA
System Board NDC PG Ok Good NA NA
System Board PS1 PG FAIL Ok Good NA NA
System Board PS2 PG FAIL Ok Good NA NA
System Board BP0 PG Ok Good NA NA
System Board BP1 PG Ok Good NA NA
System Board 1.8V SW PG Ok Good NA NA
System Board 2.5V SW PG Ok Good NA NA
System Board 5V SW PG Ok Good NA NA
System Board PVNN SW PG Ok Good NA NA
System Board VSB11 SW PG Ok Good NA NA
System Board VSBM SW PG Ok Good NA NA
System Board 3.3V B PG Ok Good NA NA
CPU1 MEM012 VDDQ PG Ok Good NA NA
CPU1 MEM012 VPP PG Ok Good NA NA
CPU1 MEM012 VTT PG Ok Good NA NA
CPU1 MEM345 VDDQ PG Ok Good NA NA
CPU1 MEM345 VPP PG Ok Good NA NA
CPU1 MEM345 VTT PG Ok Good NA NA
CPU1 VCCIO PG Ok Good NA NA
CPU1 VCORE PG Ok Good NA NA
CPU1 FIVR PG Ok Good NA NA
CPU2 MEM012 VDDQ PG Ok Good NA NA
CPU2 MEM012 VPP PG Ok Good NA NA
CPU2 MEM012 VTT PG Ok Good NA NA
CPU2 MEM345 VDDQ PG Ok Good NA NA
CPU2 MEM345 VPP PG Ok Good NA NA
CPU2 MEM345 VTT PG Ok Good NA NA
CPU2 VCCIO PG Ok Good NA NA
CPU2 VCORE PG Ok Good NA NA
CPU2 FIVR PG Ok Good NA NA
PS1 Voltage 1 Ok 232.00V NA NA
PS2 Voltage 2 Ok 230.00V NA NA
System Board 3.3V A PG Ok Good NA NA
CPU1 VSA PG Ok Good NA NA
CPU2 VSA PG Ok Good NA NA
System Board BP2 PG Ok Good NA NA
Sensor Type : CURRENT
<Sensor Name> <Status> <Reading> <lc> <uc> <lnc>[R/W] <unc>[R/W]
[Key = iDRAC.Embedded.1#PS1Current1]
PS1 Current 1 Ok 0.4Amps NA NA 0Amps [N] 0Amps [N]
[Key = iDRAC.Embedded.1#PS2Current2]
PS2 Current 2 Ok 0.4Amps NA NA 0Amps [N] 0Amps [N]
[Key = iDRAC.Embedded.1#SystemBoardPwrConsumption]
System Board Pwr Consumption Ok 130Watts NA 1794Watts 0Watts [N] 1638Watts [Y]
Sensor Type : PROCESSOR
<Sensor Name> <Status> <State> <lc> <uc>
CPU1 Status Ok Presence_Detected NA NA
CPU2 Status Ok Presence_Detected NA NA
Sensor Type : MEMORY
<Sensor Name> <Status> <State> <lc> <uc>
DIMM A1 Ok Presence_Detected NA NA
DIMM A2 N/A Absent NA NA
DIMM A3 N/A Absent NA NA
DIMM A4 N/A Absent NA NA
DIMM A5 N/A Absent NA NA
DIMM A6 N/A Absent NA NA
DIMM A7 N/A Absent NA NA
DIMM A8 N/A Absent NA NA
DIMM A9 N/A Absent NA NA
DIMM A10 N/A Absent NA NA
DIMM A11 N/A Absent NA NA
DIMM A12 N/A Absent NA NA
DIMM B1 Ok Presence_Detected NA NA
DIMM B2 N/A Absent NA NA
DIMM B3 N/A Absent NA NA
DIMM B4 N/A Absent NA NA
DIMM B5 N/A Absent NA NA
DIMM B6 N/A Absent NA NA
DIMM B7 N/A Absent NA NA
DIMM B8 N/A Absent NA NA
DIMM B9 N/A Absent NA NA
DIMM B10 N/A Absent NA NA
DIMM B11 N/A Absent NA NA
DIMM B12 N/A Absent NA NA
Sensor Type : BATTERY
<Sensor Name> <Status> <Reading> <lc> <uc>
System Board CMOS Battery Ok Present NA NA
Sensor Type : PERFORMANCE
<Sensor Name> <Status> <State> <lc> <uc>
System Board Power Optimized Ok Not Degraded NA NA
Sensor Type : INTRUSION
<Sensor Name> <Intrusion> <Status>
System Board Intrusion Closed Power ON
Sensor Type : REDUNDANCY
<Sensor Name> <Status> <Type>
System Board Fan Redundancy Full Redundant Fan
Sensor Type : SYSTEM PERFORMANCE
<Sensor Name> <Status> <Reading> <lc> <uc> <lnc>[R/W] <unc>[R/W]
[Key = iDRAC.Embedded.1#SystemBoardIOUsage]
System Board IO Usage Ok 0% NA NA NA [N] 101% [Y]
[Key = iDRAC.Embedded.1#SystemBoardMEMUsage]
System Board MEM Usage Ok 0% NA NA NA [N] 101% [Y]
[Key = iDRAC.Embedded.1#SystemBoardSYSUsage]
System Board SYS Usage Ok 0% NA NA NA [N] 101% [Y]
[Key = iDRAC.Embedded.1#SystemBoardCPUUsage]
System Board CPU Usage Ok 0% NA NA NA [N] 101% [Y]
Sensor Type : REMOVABLE MEDIA
<Sensor Name> <Status>
VFLASH SD Absent
这就是我想要的：
result = {"CPU1":"35C", "CPU2":"39C", "System Board Inlet Temp":"18C", "System Board Exhaust Temp":"29C"}
相反，我得到：
result = {'CPU1 Temp Ok 44C 3C 88C NA [N] NA [N], Temp Ok 44C 3C 88C NA [N] NA [N]': 'CPU1', 'CPU2 Temp Ok 47C 3C 88C NA [N] NA [N], Temp Ok 47C 3C 88C NA [N] NA [N]': 'CPU2', 'System Board Inlet Temp Ok 27C -7C 47C 3C [Y] 43C [Y], Board Inlet Temp Ok 27C -7C 47C 3C [Y] 43C [Y]': 'System', 'System Board Exhaust Temp Ok 38C 3C 80C 8C [N] 75C [N], Board Exhaust Temp Ok 38C 3C 80C 8C [N] 75C [N]': 'System'}
这是我的代码：
def get_servers_temps():
"Return A dict mapping from sensor name to sensor value"
cmd = "racadm getsensorinfo"
raw_data = os.popen(cmd).readlines()
result = {}
for line in raw_data:
fields = line.split('| ')
if " Temp" in fields[-1]:
k1 = fields[0].strip()
vfields = fields[-1].strip().split()
value = vfields[0]
k2 = ' '.join(vfields[1:])
key = k1 + ", " + k2
result[key]=value
return result
我真的很感激任何帮助
Tags： boardtypestatusperformanceoksensorsystemtemp
热门问题
- 如何在python中从数据帧列中删除分类值？
- 如何在python中从数据帧列表中删除引号
- 如何在python中从数据帧创建列表
- 如何在Python中从数据帧创建嵌套的JSON
- 如何在Python中从数据帧显示wordcloud
- 如何在Python中从数据帧的时间戳中删除字符
- 如何在Python中从数据帧绘制简单绘图？
- 如何在python中从数据帧行提取具有特定长度的范围？
- 如何在python中从数据帧设置dict中的值
- 如何在Python中从数据库中获得一个结果
- 如何在python中从数据框中绘制分类条形图
- 如何在Python中从数据框中选择特定细节？
- 如何在python中从数据集中删除unicode
- 如何在python中从数据集中删除某些数值？
- 如何在python中从数据集中选择行
- 如何在Python中从数组中删除元素
- 如何在python中从数组中删除单个倒逗号？
- 如何在python中从数组中删除对象？
- 如何在python中从数组中删除引号
- 如何在python中从数组中删除所有最小值
热门文章
- Python覆盖写入文件
- 怎样创建一个 Python 列表？
- Python3 List append()方法使用
- 派森语言
- Python List pop()方法
- Python Django Web典型模块开发实战
- Python input() 函数
- Python3 列表(list) clear()方法
- Python游戏编程入门
- 如何创建一个空的set?
- python如何定义(创建)一个字符串
- Python标准库 [The Python Standard Library by Ex
- Python网络数据爬取及分析从入门到精通（分析篇）
- Python3 for 循环语句
- Python List insert() 方法
- Python 字典(Dictionary) update()方法
- Python编程无师自通 专业程序员的养成
- Python3 List count()方法
- Python 网络爬虫实战 [Web Crawler With Python]
- Python Cookbook（第2版）中文版
您可以使用
re模块来解析字符串（regex101）：印刷品：
编辑：
印刷品：
相关问题 更多 >
编程相关推荐