Jenkins哈希的Python实现？

Question

是否存在Jenkins hash算法的本机Python实现？在

我需要一个哈希算法，它接受任意字符串并将其转换为32位整数。对于给定的字符串，它必须保证跨平台返回相同的整数。在

我研究了ELF散列算法，找到了一个Python实现。考虑到上述标准，这是否是一个合适的替代品？（http://www.partow.net/programming/hashfunctions/#ELFHashFunction）

Answer 1

最后我自己完成了。根据原始版权声明发布（见下文）。自担风险使用并享受乐趣：-）

'''Implements a straight Jenkins lookup hash - http://burtleburtle.net/bob/hash/doobs.html

Usage: 
    from jhash import jhash
    print jhash('My hovercraft is full of eels')

Returns: unsigned 32 bit integer value

Prereqs: None

Tested with Python 2.6.
Version 1.00 - der@dod.no - 23.08.2010

Partly based on the Perl module Digest::JHash
http://search.cpan.org/~shlomif/Digest-JHash-0.06/lib/Digest/JHash.pm

Original copyright notice:
    By Bob Jenkins, 1996.  bob_jenkins@burtleburtle.net.  You may use this
    code any way you wish, private, educational, or commercial.  It's free.

    See http://burtleburtle.net/bob/hash/evahash.html
    Use for hash table lookup, or anything where one collision in 2^^32 is
    acceptable.  Do NOT use for cryptographic purposes.
'''

def mix(a, b, c):
    '''mix() -- mix 3 32-bit values reversibly.
For every delta with one or two bits set, and the deltas of all three
  high bits or all three low bits, whether the original value of a,b,c
  is almost all zero or is uniformly distributed,
* If mix() is run forward or backward, at least 32 bits in a,b,c
  have at least 1/4 probability of changing.
* If mix() is run forward, every bit of c will change between 1/3 and
  2/3 of the time.  (Well, 22/100 and 78/100 for some 2-bit deltas.)'''
    # Need to constrain U32 to only 32 bits using the & 0xffffffff 
    # since Python has no native notion of integers limited to 32 bit
    # http://docs.python.org/library/stdtypes.html#numeric-types-int-float-long-complex
    a &= 0xffffffff; b &= 0xffffffff; c &= 0xffffffff
    a -= b; a -= c; a ^= (c>>13); a &= 0xffffffff
    b -= c; b -= a; b ^= (a<<8); b &= 0xffffffff
    c -= a; c -= b; c ^= (b>>13); c &= 0xffffffff
    a -= b; a -= c; a ^= (c>>12); a &= 0xffffffff
    b -= c; b -= a; b ^= (a<<16); b &= 0xffffffff
    c -= a; c -= b; c ^= (b>>5); c &= 0xffffffff
    a -= b; a -= c; a ^= (c>>3); a &= 0xffffffff
    b -= c; b -= a; b ^= (a<<10); b &= 0xffffffff
    c -= a; c -= b; c ^= (b>>15); c &= 0xffffffff
    return a, b, c

def jhash(data, initval = 0):
    '''hash() -- hash a variable-length key into a 32-bit value
  data    : the key (the unaligned variable-length array of bytes)
  initval : can be any 4-byte value, defaults to 0
Returns a 32-bit value.  Every bit of the key affects every bit of
the return value.  Every 1-bit and 2-bit delta achieves avalanche.'''
    length = lenpos = len(data)

    # empty string returns 0
    if length == 0:
        return 0

    # Set up the internal state
    a = b = 0x9e3779b9 # the golden ratio; an arbitrary value
    c = initval        # the previous hash value
    p = 0              # string offset

    # ------------------------- handle most of the key in 12 byte chunks
    while lenpos >= 12:
        a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24))
        b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16) + (ord(data[p+7])<<24))
        c += (ord(data[p+8]) + (ord(data[p+9])<<8) + (ord(data[p+10])<<16) + (ord(data[p+11])<<24))
        a, b, c = mix(a, b, c)
        p += 12
        lenpos -= 12

    # ------------------------- handle the last 11 bytes
    c += length
    if lenpos >= 11: c += ord(data[p+10])<<24
    if lenpos >= 10: c += ord(data[p+9])<<16
    if lenpos >= 9:  c += ord(data[p+8])<<8
    # the first byte of c is reserved for the length
    if lenpos >= 8:  b += ord(data[p+7])<<24
    if lenpos >= 7:  b += ord(data[p+6])<<16
    if lenpos >= 6:  b += ord(data[p+5])<<8
    if lenpos >= 5:  b += ord(data[p+4])
    if lenpos >= 4:  a += ord(data[p+3])<<24
    if lenpos >= 3:  a += ord(data[p+2])<<16
    if lenpos >= 2:  a += ord(data[p+1])<<8
    if lenpos >= 1:  a += ord(data[p+0])
    a, b, c = mix(a, b, c)

    # ------------------------- report the result
    return c

if __name__ == "__main__": 
    hashstr = 'My hovercraft is full of eels'
    myhash = jhash(hashstr)
    print 'jhash("%s"): %d' % (hashstr, myhash)

Answer 2

您可以只使用md5sum的前32位

>>> from hashlib import md5
>>> from struct import unpack
>>> unpack("<IIII",md5("thestring").digest())[0]
1515985217

Answer 3

本机python代码应该提供与原始lookup3.c相同的哈希值

# Need to constrain U32 to only 32 bits using the & 0xffffffff
# since Python has no native notion of integers limited to 32 bit
# http://docs.python.org/library/stdtypes.html#numeric-types-int-float-long-complex

'''Original copyright notice:
    By Bob Jenkins, 1996.  bob_jenkins@burtleburtle.net.  You may use this
    code any way you wish, private, educational, or commercial.  Its free.
'''

def rot(x,k):
    return (((x)<<(k)) | ((x)>>(32-(k))))

def mix(a, b, c):
    a &= 0xffffffff; b &= 0xffffffff; c &= 0xffffffff
    a -= c; a &= 0xffffffff; a ^= rot(c,4);  a &= 0xffffffff; c += b; c &= 0xffffffff
    b -= a; b &= 0xffffffff; b ^= rot(a,6);  b &= 0xffffffff; a += c; a &= 0xffffffff
    c -= b; c &= 0xffffffff; c ^= rot(b,8);  c &= 0xffffffff; b += a; b &= 0xffffffff
    a -= c; a &= 0xffffffff; a ^= rot(c,16); a &= 0xffffffff; c += b; c &= 0xffffffff
    b -= a; b &= 0xffffffff; b ^= rot(a,19); b &= 0xffffffff; a += c; a &= 0xffffffff
    c -= b; c &= 0xffffffff; c ^= rot(b,4);  c &= 0xffffffff; b += a; b &= 0xffffffff
    return a, b, c

def final(a, b, c):
    a &= 0xffffffff; b &= 0xffffffff; c &= 0xffffffff
    c ^= b; c &= 0xffffffff; c -= rot(b,14); c &= 0xffffffff
    a ^= c; a &= 0xffffffff; a -= rot(c,11); a &= 0xffffffff
    b ^= a; b &= 0xffffffff; b -= rot(a,25); b &= 0xffffffff
    c ^= b; c &= 0xffffffff; c -= rot(b,16); c &= 0xffffffff
    a ^= c; a &= 0xffffffff; a -= rot(c,4);  a &= 0xffffffff
    b ^= a; b &= 0xffffffff; b -= rot(a,14); b &= 0xffffffff
    c ^= b; c &= 0xffffffff; c -= rot(b,24); c &= 0xffffffff
    return a, b, c

def hashlittle2(data, initval = 0, initval2 = 0):
    length = lenpos = len(data)

    a = b = c = (0xdeadbeef + (length) + initval)

    c += initval2; c &= 0xffffffff

    p = 0  # string offset
    while lenpos > 12:
        a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24)); a &= 0xffffffff
        b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16) + (ord(data[p+7])<<24)); b &= 0xffffffff
        c += (ord(data[p+8]) + (ord(data[p+9])<<8) + (ord(data[p+10])<<16) + (ord(data[p+11])<<24)); c &= 0xffffffff
        a, b, c = mix(a, b, c)
        p += 12
        lenpos -= 12

    if lenpos == 12: c += (ord(data[p+8]) + (ord(data[p+9])<<8) + (ord(data[p+10])<<16) + (ord(data[p+11])<<24)); b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16) + (ord(data[p+7])<<24)); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24));
    if lenpos == 11: c += (ord(data[p+8]) + (ord(data[p+9])<<8) + (ord(data[p+10])<<16)); b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16) + (ord(data[p+7])<<24)); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24));
    if lenpos == 10: c += (ord(data[p+8]) + (ord(data[p+9])<<8)); b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16) + (ord(data[p+7])<<24)); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24));
    if lenpos == 9:  c += (ord(data[p+8])); b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16) + (ord(data[p+7])<<24)); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24));
    if lenpos == 8:  b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16) + (ord(data[p+7])<<24)); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24));
    if lenpos == 7:  b += (ord(data[p+4]) + (ord(data[p+5])<<8) + (ord(data[p+6])<<16)); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24));
    if lenpos == 6:  b += ((ord(data[p+5])<<8) + ord(data[p+4])); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24))
    if lenpos == 5:  b += (ord(data[p+4])); a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24));
    if lenpos == 4:  a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16) + (ord(data[p+3])<<24))
    if lenpos == 3:  a += (ord(data[p+0]) + (ord(data[p+1])<<8) + (ord(data[p+2])<<16))
    if lenpos == 2:  a += (ord(data[p+0]) + (ord(data[p+1])<<8))
    if lenpos == 1:  a += ord(data[p+0])
    a &= 0xffffffff; b &= 0xffffffff; c &= 0xffffffff
    if lenpos == 0: return c, b

    a, b, c = final(a, b, c)

    return c, b

def hashlittle(data, initval=0):
    c, b = hashlittle2(data, initval, 0)
    return c

if __name__ == "__main__":
    import sys
    hashstr = 'Four score and seven years ago'
    hash, hash2 = hashlittle2(hashstr, 0xdeadbeef, 0xdeadbeef)
    print '"%s": %x %x' % (hashstr, hash, hash2)

    hash = hashlittle(hashstr, 0)
    print '"%s": %x' % (hashstr, hash)