天哪
omfit-omas-d3d的Python项目详细描述
OMAS_D3D用作OMFIT项目一部分的文件:https://omfit.io/
提供:
- 设置气体注入硬件描述
- 设置\u pf_活动硬件\u描述\u d3d
- 设置干涉仪硬件描述
- 找到汤姆逊镜头
- 设置-汤姆逊-散射-硬件描述-d3d
- 安装费用交换硬件描述
- 安装热辐射计硬件描述
- 安装程序\u langmuir_探针\u硬件描述\u d3d
要求:
- 数量=1.12
- scipy>;=1.0
- 不确定性>;=3
- xarray>;=0.10.8
- omfit_mds==2020.12.2.22.59
- omfit_数据==2020.12.2.22.59
- omfit_commonclasses==2020.12.2.22.59
作者:
https://omfit.io/contributors.html
文件:
设置气体注入硬件描述
Sets up DIII-D gas injector data.
R and Z are from the tips of the arrows in puff_loc.pro; phi from angle listed in labels in puff_loc.pro .
I recorded the directions of the arrows on the EFITviewer overlay, but I don't know how to include them in IMAS, so
I commented them out.
Warning: changes to gas injector configuration with time are not yet included. This is just the best picture I could
make of the 2018 configuration.
Data sources:
EFITVIEWER: iris:/fusion/usc/src/idl/efitview/diagnoses/DIII-D/puff_loc.pro accessed 2018 June 05, revised 20090317
DIII-D webpage: https://diii-d.gat.com/diii-d/Gas_Schematic accessed 2018 June 05
DIII-D wegpage: https://diii-d.gat.com/diii-d/Gas_PuffLocations accessed 2018 June 05
Updated 2018 June 05 by David Eldon
:return: dict
Information or instructions for follow up in central hardware description setup
设置\u pf_活动硬件\u描述\u d3d
^{pr2}$设置干涉仪硬件描述
Writes DIII-D CO2 interferometer chord locations into ODS.
The chord endpoints ARE NOT RIGHT. Only the R for vertical lines or Z for horizontal lines is right.
Data sources:
DIII-D webpage: https://diii-d.gat.com/diii-d/Mci accessed 2018 June 07 D. Eldon
:param ods: an OMAS ODS instance
:param shot: int
:return: dict
Information or instructions for follow up in central hardware description setup
找到汤姆逊镜头
阅读汤姆逊散射硬件图,找出每个和弦通过哪个镜头
设置-汤姆逊-散射-硬件描述-d3d
Gathers DIII-D Thomson measurement locations from MDSplus and loads them into OMAS
:param revision: string
Thomson scattering data revision, like 'BLESSED', 'REVISIONS.REVISION00', etc.
:return: dict
Information or instructions for follow up in central hardware description setup
安装费用交换硬件描述
Gathers DIII-D CER measurement locations from MDSplus and loads them into OMAS
:param analysis_type: string
CER analysis quality level like CERQUICK, CERAUTO, or CERFIT. CERQUICK is probably fine.
:return: dict
Information or instructions for follow up in central hardware description setup
安装热辐射计硬件描述
Load DIII-D bolometer chord locations into the ODS
Data sources:
- iris:/fusion/usc/src/idl/efitview/diagnoses/DIII-D/bolometerpaths.pro
- OMFIT-source/modules/_PCS_prad_control/SETTINGS/PHYSICS/reference/DIII-D/bolometer_geo , access 2018June11 Eldon
:return: dict
Information or instructions for follow up in central hardware description setup
安装程序\u langmuir_探针\u硬件描述\u d3d
Load DIII-D Langmuir probe locations into an ODS
:param ods: ODS instance
:param shot: int
:return: dict
Information or instructions for follow up in central hardware description setup
- 项目
标签: