我正试图用Python 2.7和PySerial同时读取多个串行端口。
特点应为:
最大的问题是:如何将串行端口对象传递给子进程?
或:
是否存在另一种(或许更好的)解决方案?
(也许this:如何将扭曲的串行端口应用于我的问题?)
我想我还不完全清楚我想要实现什么。
我想同时读取2个或更多串行端口。由于超时和读取时间,无法在一个进程中同时读取它们。
以下方法
ser1 = serial.Serial(port="COM1",baudrate=9600)
ser2 = serial.Serial(port="COM2",baudrate=9600)
ser1.write('command for reading out device 1')
output1 = ser1.readline()
ser2.write('command for reading out device 2')
# now you have to wait at least 100ms for device 2 to respond
output2 = ser2.readline()
不能满足我的需要。
另一种方法是并行化子进程中的串行读数。
import serial # serial communication
from subprocess import Popen, PIPE
ports = ["COM1", "COM2"]
for port in ports:
ser = serial.Serial()
ser.port=port
ser.baudrate=9600
# set parity and ...
serialobjects.append(ser)
# call subprocess
# pass the serial object to subprocess
# read out serial port
# HOW TO PASS SERIAL OBJECT HERE to stdin
p1 = Popen(['python', './ReadCOM.py'], stdin=PIPE, stdout=PIPE, stderr=PIPE) # read COM1 permanently
p2 = Popen(['python', './ReadCOM.py'], stdin=PIPE, stdout=PIPE, stderr=PIPE) # read COM2 permanently
for i in range(10):
print "received from COM1: %s" % p1.stdout.readline() # print output from ReadCOM.py for COM1
print "received from COM2: %s" % p2.stdout.readline() # print output from ReadCOM.py for COM2
import sys
while True: # The program never ends... will be killed when master is over.
# sys.stdin.readline()
ser.write('serial command here\n') # send command to serial port
output = ser.readline() # read output
sys.stdout.write(output) # write output to stdout
sys.stdout.flush()
提前谢谢!
第一次更改
ReadCOM.py
以接收参数在把它传进来之后:
相关问题 更多 >
编程相关推荐