Python接口到Alien RFID读取

Question

已更正。请看下面对我自己问题的回答。在

我正试图通过python2.7的TCP/IP接口与一个外来的rfid9800阅读器进行通信。
但是，附加的测试代码不会超出读卡器的登录名，并且读卡器不会处理“get ReaderName”命令。
我使用的是默认用户名（alien）和密码（password）。从外星界面看一切正常。登录交换有问题吗？什么不对？在

import socket

cmdHost, cmdPort = '192.168.1.106', 23

CmdDelim = '\n'               # Corrected from '\n\r' to '\n'.  Delimiter of Alien commands (sent to reader).
ReaderDelim = '\r\n\0'        # Delimiter of Alien reader responses (received from reader).
CmdPrefix = chr(1)            # Causes Alien reader to suppress prompt on response.

def getResponse( conn ):
    ''' Get the reader's response with correct terminator. '''
    response = ''
    while not response.endswith( ReaderDelim ):
        more = conn.recv( 4096 )
        if not more:
            break
        response += more
    return response

def GetReaderName():
    ''' Log into the reader, get the reader name, then quit. '''
    print 'Sending commands to the Alien reader...'
    cmdSocket = socket.socket( socket.AF_INET, socket.SOCK_STREAM )
    try:
        cmdSocket.connect( (cmdHost, int(cmdPort)) )
    except Exception as inst:
        log( 'Reader Connection Failed: CmdAddr=%s:%d' % (cmdHost, cmdPort) )
        log( '%s' % inst )
        cmdSocket.close()
        return False

    # Read the initial header from the reader.
    response = getResponse( cmdSocket )
    print response

    # UserName
    cmdSocket.sendall( 'alien%s' % CmdDelim )
    response = getResponse( cmdSocket )
    print response

    # Password
    cmdSocket.sendall( 'password%s' % CmdDelim )
    response = getResponse( cmdSocket )
    print response

    # Get ReaderName command
    cmdSocket.sendall( '%sGet ReaderName%s' % (CmdPrefix, CmdDelim) )
    response = getResponse( cmdSocket )
    print response

    # Quit
    cmdSocket.sendall( '%sQuit%s' % (CmdPrefix, CmdDelim) )
    response = getResponse( cmdSocket )
    print response

    cmdSocket.close()
    return True

if __name__ == '__main__':
    GetReaderName()

Answer 1

您有一些print response命令。打印什么，还是不打印？在

Answer 2

在进一步的实验之后，我可以确认命令终止符只是'\n'[LF]，而不是TCP接口的'\r\n'[CR][LR]。因此，如果将上述代码更正为：

CmdDelim = '\n'

现在，一切正常。在

不幸的是，外星人的文件非常明确地指出[CR][LF]是命令终止符。也许这对串行接口是正确的，但它不适用于TCP。在